2.2 Adding Zones to an Existing System
Once a system is set up, adding additional P100, P200, or P3100 zone players is easily done.
Fig. 19
From this point the setup is identical to the process
covered in section 2.1, New System Setup.
To do this, go to the "Settings" button at the bottom of the Dashboard, which is
the section of the app defined by the zone icons, as shown in fig. 19.
Fig. 20
12
Touch the "Add a NuVo Component" but-
ton as shown in fig. 20. This will take you
to the zone setup procedure described in
section 2.1 New Wireless System
Setup .