Bluetooth ® Playback; Line In - Nuvo NV-P100 Series Product Manual

NUVO
®
3.3 Bluetooth Playback
®
An important feature of the NVP200-xx zone player is the ability to stream music content from any Bluetooth enabled device.
To take advantage of Bluetooth streaming, make sure that your device's Bluetooth is turned on. This is done within the
device's settings. When in range of a NVP200-xx, the Nuvo zone will appear in your device's Bluetooth menu. Choose the
zone to "pair" your device, as shown in Fig. 105.
Fig. 105
A paired device will remain paired and available when it is within range of the paired zone. To connect a device and initi-
ate playback, select Bluetooth as an audio source, as shown in Fig. 106, then select the desired device, as shown in Fig.
107. The app will show the selected device as "Connected," as shown in Fig. 108, and the zone player will switch to the
Bluetooth stream. Music content control is made from the connected device you have selected. Tip: Ensure volume on the
connected device is up and the desired content is playing before connection.
Fig. 108
Fig. 106 Fig. 107

3.4 Line In

Each player has a 3.5 mm stereo audio Line In (or RCA jacks for the NVP3500-xx) on its back panel. This input allows any
local zone analog music source to be plugged in and added to the system as an additional source input. This is done by
connecting a 3.5 mm stereo audio cable from the audio output on the playback device and to the input on the zone player,
as shown in Fig. 109 (3.5 mm stereo to RCA adapter cable used for NVP3500-xx not shown).
Fig. 109
36