Physical Installation; Ica-210 / Ica-210W - Planet ica-210w Manual

Physical Installation

ICA-210 / ICA-210W

1. Connect an Ethernet cable
Connect one end of an Ethernet cable to the LAN port located on the ICA-210 side panel
and attach the other end to the network device (hub or switch).
2. Attach the external power supply
Connect the provided power adapter to the ICA-210's connector labeled "5VDC" on side
panel.
3. Check the LEDs
The STATUS and ACCESS LEDs should be on.
Side Panel of ICA-210 / ICA-210W
2