Planet ica-210w Manual page 7

Please make sure to use a vacant IP address when you assign the IP

address for Internet Camera. This will prevent errors from occurring if
Note:
the IP address is overlapped.
DHCP
If your network is using DHCP server you can click on "DHCP". Under this setting
Internet Camera will automatically assign an IP address from DHCP server. Each
time Internet Camera starts up; make sure the DHCP server is setup well to assign
a static IP to your Internet Camera.
Static IP
Directly enter the IP address according to local network environment.
The default settings are as follows:
Default IP – 192.168.0.20
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
DNS IP Address:
DNS (Domain Name System) server is an Internet service that translates domain
names into IP addresses. Enter at least one DNS IP address.
PPPoE
If your application requires direct connection from an ADSL modem then you need
to have an ISP PPPoE account. Click on "PPPoE" option and enter the User ID and
Password into the respective fields. Internet Camera will get an IP address from the
ISP each time Internet Camera boots.
ICA-210W wireless configuration
5