3D Auto Operation - Mitsubishi Electric DXK09ZJ-S Technical Manual

(6) 3D auto operation

(a)
1)
Operation mode
At cooling
At heating
2)
a)
Flap
Louver
b)
Flap
Louver
c)
Flap
Louver
d)
Flap
Louver
e)
Operation mode
At cooling
At heating
(b)
Air flow selection
Flap
Louver
Indoor temp. – Setting temp. >5°C
HIGH POWER
Setting temp. – Indoor temp. >5°C
HIGH POWER
Cooling
Wide (Fixed)
Cooling
Horizontal blowing (Fixed)
Cooling
Cooling
Horizontal blowing (Fixed)
Indoor temp. – Setting temp. 2°C < =
The control in 4) continues.
< =
Setting temp. – Indoor temp. 2°C
The control in 4) continues.
According to DRY operation.
Horizontal blowing (Fixed)
Air flow selection
AUTO
Indoor temp. – Setting temp. 5°C
AUTO
Setting temp. – Indoor temp. 5°C
AUTO
Heating
Up/down Swing
Center (Fixed)
c
Heating
Slant forwardl blowing (Fixed)
Left/right Swing
d
Heating
Up/down Swing
Center (Fixed)
Heating
Slant forwardl blowing (Fixed)
Wide (Fixed)
Air flow direction contorol
2°C < Indoor temp. – Setting temp. 5°C
Control returns to the control in 2).
2°C < Setting temp. – Indoor temp. 5°C
Control returns to the control in 2).
Wide (Fixed)

- -
'09•SRK-DB-087D
'11 • SRK-T-118
HI MED
< =
HI MED
< =
< = Indoor temp. – Setting temp. > 5°C
Control returns to the control in 1).
< =
Setting temp. – Indoor temp. > 5°C
Control returns to the control in 1).
LO
LO