Bostitch F21PL Technical Data Manual page 5

SAFETY INSTRUCTIONS
© Stanley Bostitch
IMPORTANT READ CAREFULLY: It is important that all operators read and understand all sections of this
Tool Technical Data manual and the separate Safety and Operating Instruction Manual which come with
GB Not to be reproduced without permission. Unauthorised copies of this document do not constitute CE
this tool. Failure to do so could result in you or others in the working area to be seriously injured.
compliance for the products.
WARNING! Eye protection in accordance with 89/686/EEC, and with equal or greater grade than defined
FR Reproduction interdite sans permission préalable. Les copies non autorisées de ce document ne signifient en
in EN166 should be used. However all aspects of operators work, environment and other type/s of machinery being used,
rien que les produits soient conformes aux normes CE.
should also be considered when selecting any personal protection equipment. Note: Non-side shielded spectacles and
face shields alone do not provide adequate protection.
DE Vervielfältigung nicht ohne Genehmigung gestattet. Unzulässig erstellte Kopien dieses Dokuments erfüllen nicht
die CE-Richtlinien für Produkte.
WARNING! To prevent accidental injuries:
●
Never place a hand or any other part of the body in fastener discharge area of tool.
NL Mag niet worden vermenigvuldigd zonder toestemming. Onrechtmatige kopieën van dit document willen niet
●
Never point tool at yourself or anyone whether it contains fasteners or not.
zeggen dat de producten voldoen aan de CE-vereisten.
●
Never engage in horseplay.
●
Never pull the trigger unless the nose is directed towards the work.
DK Må ikke gengives uden tilladelse. Uautoriserede kopier af dette dokument udgør ikke CE overholdelse for
●
Always handle the tool with care.
produkterne.
●
This tool is intended to be used for fastening wood to wood in pallet/crate and construction applications.
DO NOT USE for fastening harder materials which could cause buckling of the fasteners and damage to the
FI Ei saa jäljentää ilman lupaa. Tämän asiakirjan ilman valtuutusta tehdyt kopiot eivät muodosta tuotteille CE-
tool. If you are unsure of the suitability of this tool for certain applications, please contact your local sales
yhdenmukaisuutta.
office.
●
Do not pull the trigger or depress the trip mechanism whilst loading the tool.
GR Απαγορεύεται η αναπαραγωγή χωρίς προηγούμενη άδεια. Τα μη εξουσιοδοτημένα αντίγραφα του παρόντος
●
To prevent accidental actuation and possible injury, always disconnect air supply.
εγγράφου δεν αποτελούν συμμόρφωση CE για τα προϊόντα.
1. Before making adjustments. 2. When servicing the tool. 3. When clearing a jam. 4. When tool is not in use. 5. When
moving to a different work area, as accidental actuation may occur, possibly causing injury.
IT Vietata la riproduzione senza permesso. Le copie non autorizzate di questo documento non garantiscono la
●
Read the additional Safety & Operating instructions booklet before using tool.
conformità CE per i relativi prodotti.
●
Do not use oxygen and combustible gases as an energy source for pneumatically operated tools.
●
The operation of this tool can cause sparks and act as a source of ignition for flammable fuels and gases.
NO Skal ikke reproduseres uten tillatelse. Ikke godkjente kopier av dette dokumentet oppfyller ikke kravene for CE-
merking for produktet.
IMPORTANT! Tool Operation:
●
To identify the operation type of your model, check the ID label affixed to the tool/ rear of this manual and the corresponding
PT Reprodução proibida sem autorização prévia. As cópias não autorizadas deste documento não estão em
table (marked ?) column L for that model.Read the corresponding section in the Safety & Operating instructions for
conformidade com a CE para os produtos.
information of each trip type.
ES Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
F21PL & N89RH17-2MCN
conformidad con las normas CE de los productos.
By the means of two different attachments the F21PL & N89RH17-2MCN can be used as either a Metal Connecting Nailer or a
standard Round Head nailer and it is important that all operators understand how the tool works with either attachment.
The tool comes with the MCN or Metal Connecting Nailer attachment fitted as standard (Fig 1a), although a normal Framing
SE Prohibida la reproducción sin permiso. Las copias no autorizadas de este documento no suponen la
Lower Contact Arm attachment is included inside the box to convert to a Round Head nailer if required. (Fig 1b)
conformidad con las normas CE de los productos.
To change from one type of attachment to another follow the following instructions:
PL Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
a) Disconnect tool from air supply before attempting any parts disassembly and before changing the work contacting element.
stanowią deklaracji zgodności CE prezentowanych produktów.
b) Push in on locking button.(Fig 2)
c) Slide contact arm down until it easily detaches from the tool.
CZ Niniejszy dokument nie może być kopiowany bez pozwolenia. Nieautoryzowane kopie niniejszego dokumentu nie
d) Depress Locking Button and fully slide the new attachment onto tool. (Fig 2)
stanowią deklaracji zgodności CE prezentowanych produktów.
e) Release Locking Button.
f) Make sure that the attachment is installed in the full up - position and that the locking button has returned to release position.
SK Rozmnožovanie bez povolenia je zakázané. Neoprávnené kópie tohto dokumentu nie sú v súlade s CE pre dané
Note: The Metal Connector Attachment is not adjustable for depth control.
výrobky.
g) Check that the attachment now moves freely up and down. If not, DO NOT USE. Have tool and Attachment serviced by an
authorized service center.
h) Reverse procedure to remove Metal Connector Attachment and to install
HU A dokumentum engedély nélkül nem sokszorosítható. Az engedély nélkül sokszorosított dokumentum nem jelenti
standard framing Lower Contact Arm.
a termék CE-megfelelőségét.
Warning! Metal Connecting nails must not be used when the Framing attachment is afixed, and Round head framing nails must not
RO Reproducerea neautorizată este interzisă. Copiile neautorizate ale acestui document nu reprezintă
be used when the Metal Connecting nailer attachment is affixed.
conformitatea CE pentru produse.
GB