Table of Contents
Advertisement
NTI SERIMUX SERIES CONSOLE SWITCH
Login user to a port and connect the user port to a host port
Action (from Keypad)
1.
Press USER
2.
Enter the user number
3.
Press PORT
4.
Enter the user port
number
5.
Press PORT again
6.
Enter the host port
number
7.
Press ENTER
The user will be connected if:
– the specified user is enabled, and is not logged in;
– the specified ports are accessible to the user;
– the user port is not connected and the port type is "User".
– the host port is not connected and the port type is "Host".
Disconnect and logout a user
Action (from Keypad)
1.
Press DISCON
2.
Press USER
3.
Enter the user number
4.
Press ENTER
Connect 2 host ports
Action (from Keypad)
1.
Press PORT
2.
Enter the first port number
3.
Press PORT again
4.
Enter the second port
number (to connect the
first port number to)
5.
Press ENTER
The two host ports will be connected if:
–
the ports are not connected
–
the ports type is "Host".
Reaction of SERIMUX
-
The LED "User" will illuminate.
-
The port 0 LED will be illuminated, the other port LEDs will be OFF.
-
The corresponding port LED will illuminate
-
The LED "Port" will illuminate
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
The LED "Port" will illuminate
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
The User main menu will be displayed on the terminal application on the user port: (see Fig.
18 on page 21 )
-
The administrator port (if connected) and the data traffic of any linked ports will be indicated
by illuminating and flashing corresponding port LEDs respectively.
Reaction of SERIMUX
-
The LED "Discon" will illuminate.
-
The LED "User" will illuminate.
-
The corresponding port LED will illuminate, the other port LEDs will be OFF
-
The LEDs "Port", "Admin", "User", and "Dison" will illuminate briefly.
Reaction of SERIMUX
-
The LED "Port" will illuminate.
-
The port 0 LED will be illuminated. The other port LEDs will be OFF.
-
The corresponding port LED will illuminate, the other port LEDs will be OFF
-
The LED "Port" will illuminate. The port 0 LED will be illuminated, the other port LEDs will
be OFF.
-
The corresponding port LED will illuminate. The other port LEDs will be OFF.
-
The administrator port and the data traffic between linked ports (if any) will be indicated by
the corresponding LEDs.
26
Advertisement
Table of Contents
