Operation - HellermannTyton tt4000+ Operating Instructions Manual

6 Operation

6 .1 Loading labels or continuous material from rolls
6 .1 .1 Positioning the material roll on the roll holder
1 Determine the width of the material roll.
2 Open the cover.
Insert the roll material.
1 Margin stops
2 Material roll
3 Roll holder
4 Margin stops
5 Ring
Adjust the guides on the roll holder.
3 Roll holder
4 Margin stops
5 Ring
6 Arrow
3 Turn the ring counterclockwise, so that the arrow points
to the open lock.
4 Remove the margin stop from the roll holder.
5 Load material roll on the roll holder with the printed side
up.
1
2
3
4
5
4
6
5
3
Operating Instructions • Thermal transfer printer TT4000
13
12
11
10 9 8 7
Insert the roll material.
7 Guide roller
8 Guides
9 Label light barrier
10 Knurled knob
11 Knob
12 Lever
13 Cover
6 Push the margin stop onto the roll holder.
7 Push the margin stops until both margin stops rest
against the material roll and resistance can be felt.
8 Turn the ring clockwise, so that the arrow points to the
closed lock.
The guides must slow down the roll slightly without blocking
it. If necessary, adjust the position of the guides
symmetrically.
; The material is positioned on the roll holder.
+ • 01-2016 • 031-93352
Operation
11