Unpacking the printer, the following items are included in the carton. One printer unit One Windows USB Key Drive for Drivers / Manuals. One quick installation guide One power cord One USB interface cable If any parts are missing, please contact HellermannTyton Support: 1.800.537.1512...
All manuals and user guides at all-guides.com Loading Ribbon...
Page 9
All manuals and user guides at all-guides.com...
Page 10
All manuals and user guides at all-guides.com...
Page 11
All manuals and user guides at all-guides.com...
Page 12
All manuals and user guides at all-guides.com Lock down, push up face plate, and close lid. Setup Setting Up the Printer Connecting to the Power Supply The printer is equipped with a wide area network unit. The device can be operated with a supply voltage of 230 V~/50 Hz or 115 V~/60 Hz without adjustment.
All manuals and user guides at all-guides.com Installing the printer drivers Plug your USB stick into a separate port on your computer; this stick contains your printer driver SELECT “Open folder to view files”...
Page 14
All manuals and user guides at all-guides.com ACCESS THE FILES ON THE USB STICK DOUBLE CLICK ON PrnInst TO OPEN THE DRIVER INSTALLER CLICK ON NEXT...
Page 15
All manuals and user guides at all-guides.com Select TTM430 Next Choose a USB Port that is NOT used by any other device. This must only be for the printer.
Page 16
All manuals and user guides at all-guides.com FINISH Congratulations, you have successfully set up your TTM430!
Need help?
Do you have a question about the TTM430 and is the answer not in the manual?
Questions and answers