Turning The Radar On And Off - JRC 1500 MKII Instruction Manual

4.2 TURNING THE RADAR ON AND OFF

TO TURN ON
TO TRANSMIT
TO STAND-BY
TO TURN OFF
When you
Press the STBY/OFF key, a 90 second warm-up count down timer is activated
and displayed together with the total (display unit) usage to date.
Press the X-MIT/OFF key, the radar transmits, the scanner begins to rotate and
echoes will appear on the screen.
Press the STBY/OFF key, the radar returns to stand-by mode to reduce battery
drain. The rotator stops.
Press the X-MIT/OFF key again, the radar reverts to full transmitting function.
These sequences are also guided by on-screen prompts.
90 SEC
0000HOURS
VX.X
FIG. 4-2 TURNING THE RADAR ON/OFF
Press the STBY/OFF key.
Press the X-MIT key.
Press the STBY/OFF key.
Press the STBY/OFF key and the X-MIT/OFF key si-
multaneously.
PUSH XMIT TO OPERATE
OPERATION 23