Display Of Transponder - JRC 1500 MKII Instruction Manual

Lcd radar
Table of Contents

Advertisement

4.26 DISPLAY OF RADAR TRANSPONDER
SART (Search and Rescur Radar Transponder) is life preserving device ap-
proved by GMDSS which is used for locating survivors in the event of a disas-
ter or distress. SART operates in the 9 GHz frequency band. When it receives a
radar signal (interrogating radio wave) of 9 GHz transmitted by a rescue ship or
aircraft radar, SART transmits a series of respouse signals to the searchers to
indicate the distress position.
In order to see the SART or radar beacon mark on the radar screen.
RANGE SCALE
SEA
TUNE
IR
Land
Attention
When above settings
ship will not appear on the radar screen, so perform thorough visual monitoring of the sea
area around the own ship to avoid any collision or stranding.
Further, when more than one radar systems are mounted, while using a 9 GHz band radar
for searching SART signals, be sure to use another radar as an ordinary radar to perform
monitoring of objects around the own ship to avoid any collision, check of the position of
the own ship to avoid any stranding, and so on.
Need to retune the set for normal operation on completeion.
34
OPERATION
: Select 6 or 12 nm.
: Set to minimum.
: DETUNED to reduce the clutter.
: Set IR OFF.
[EXAMPLE]
to
are made to display SART signals, objects around the own
SART Code
Position of SART
Position of the
Rescue Craft
Other Ships

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Radar 1000Radar 1000 mkii

Table of Contents