Network Protocols Setup
These screens allow you to configure your network's use of the standard networking protocols:
IP: details are given in
IPX: details are given in
AppleTalk: details are given in
Note: AppleTalk requires the optional AppleTalk feature expansion kit.
Filter Sets (Firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
Details are given in
IP Address Serving
These screens allow you to configure IP Address serving on your network by means of DHCP, WANIP, BootP, and
with the optional AppleTalk kit, MacIP.
Details are given in
Date and Time
You can set the system's date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return to go to the Set Date and Time
screen.
System Date Format:
Current Date (MM/DD/YY):
System Time Format:
Current Time:
AM or PM:
Follow these steps to set the system's date and time:
"IP Setup, SmartIP and Network Address Translation" on page
"IPX Setup" on page 11-1.
"AppleTalk Setup" on page 12-1.
"Security" on page
14-1.
"IP address serving" on page
Set Date and Time
WAN and System Configuration 8-11
10-16.
MM/DD/YY
3/16/1998
AM/PM
10:29
AM
10-1.