Call Acceptance Scenarios - Netopia Router PN Series Reference Manual

Configuring ISDN and Leased Line Connections
If Must Match a Defined Profile is set to No, you can also set the
following parameters for accepted calls that do not match a
connection profile:
Network Address Translation
Interface-based Routing or System-based Routing
Firewall Filter Set
Transmit RIP
Receive RIP
TX RIP Policy to use either Split Horizon or Poison Reverse
Net BIOS Packet Forwarding
Net BIOS Path Delay
Periodic RIP Timers
Periodic SAP Timers

Call acceptance scenarios

The following are a few common call acceptance scenarios and
information on how to configure the router for those purposes.
To accept all calls, regardless of whether they match a
connection profile:
Toggle Must Match a Defined Profile to No.
To only accept calls that match a connection profile through use
of a name and password (or secret):
Toggle Must Match a Defined Profile to Yes, and
Set Authentication to PAP or CHAP.
Note: The authentication method you choose determines which
connection profiles are accessible to callers. For example, if you
choose PAP, callers using CHAP or no authentication will be
dropped by the answer profile.
2-47