Ipx Setup - Netopia Router PN Series Reference Manual

To go to the IPX Setup screen, from the Main Menu select Advanced
Configuration and then select Network Protocols Setup and then
select IPX Setup.
Note: If you have completed Easy Setup, the information you have
already entered will appear in the IP Setup options screen.
IPX Routing:
Ethernet Encapsulation...
Ethernet Network Address:
Ethernet Path Delay:
Ethernet NetBios Forwarding:
Ethernet Inbound SAP Filter Set... <<NONE>>
Default Gateway Address:
Filters and Filter Sets...
IPX Wan Pool Base Address
Set up the basic IPX attributes of your Netopia in this screen.
1. To enable IPX routing, select IPX Routing, toggle it to Yes, and
press Return.
2. To change Ethernet encapsulation from the commonly used
802.3 standard, select Ethernet Encapsulation and choose a
different encapsulation method.
3. Select Ethernet Network Address and enter the network
address of the IPX network connected to the Netopia Router's
Ethernet port.
Note: If the Ethernet network address is set to zero, the Router
will attempt to learn the address from any configured IPX device
on the Ethernet network or from the remote IPX network when a
call is established.

IPX Setup

On
802.3
00000000
1
No
00000000
00000000
IPX Setup 5-5