Upgrading The Netopia Router; Restarting The System - Netopia Router PN Series Reference Manual

10-8 Reference Guide

Upgrading the Netopia Router

Restarting the system

3. Select Timeout per probe (1..10 sec) to set when the trace will
timeout for each hop, up to 10 seconds. The default is 3
seconds.
4. Select Use Reverse DNS to learn the names of the routers
between the Netopia Router and the destination router. The
default is Yes.
5. Select START TRACE ROUTE and press Return. The screen will
be replaced by a scrolling screen, listing the destination, the
number of hops, the IP addresses of each hop, and the DNS
names, if selected.
6. Cancel the trace by pressing Esc. Return to the Trace Route
screen by pressing Esc twice.
You can upgrade your Netopia Router by adding new feature sets
through the Upgrade Feature Set utility.
See the release notes that came with your router or visit the
Farallon web site at www.farallon.com for information on new
feature sets, how to obtain them, and how to install them on your
Netopia Router.
You can restart the system by selecting the Restart System item in
the Statistics, Utilities, Tests screen.
You must restart the system whenever you reconfigure the Netopia
Router and want the new parameter values to take effect. Under
certain circumstances, restarting the system may also clear up
system or network malfunctions.