Current Status; Status Lights - Netopia R7200 User Reference Manual

Current status

The current status section is a table showing the current status of the WAN. For example:
---Profile Name------State---%Use-Remote Address----Est.-More Info----------
ISP
Profile Name: Lists the name of the connection profile being used, if any.
State: Lists the ports in use for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote router if the connection is using IP.
Otherwise, shows the IPX address of the connected remote router, if using IPX.
Est: Indicates whether the connection was locally ("Lcl") or remotely ("Rmt") established.
More Info: Indicates, in order of priority, the NAT address in use for this connection, the IPX address in use (if IP
is also in use), or the ISDN caller identification (if available).

Status lights

This section shows the current real-time status of the Netopia R7200's status lights (LEDs). It is useful for
remotely monitoring the router's status. The Quick View screen's arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router.
-PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
LNK RDY CH1 Ch2
G - G
Each LED representation can report one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
The section "Netopia R7200 SDSL Router status lights" on page 3-4
each LED.
Current DSL Status
P1 10
LNK LNK
- - Y -
IP 92.163.4.1
LNK RDY CH1 CH2 DATA | '-'= Off 'G'= Green
- - - - -
describes the meanings of the colors for
Monitoring Tools 13-3
Lcl NAT 192.163.100.6
| 'R'= Red 'Y'= Yellow