Table of Contents
Advertisement
Current status
The current status section is a table showing the current status of the DSL connection. For example:
Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------
ISP
Profile Name: Lists the name of the connection profile being used, if any.
Rate: Shows the line rate for this connection.
%Use: Indicates the average percent utilization of the maximum capacity of the channels in use for the
connection.
Remote Address: Shows the IP address of the connected remote router.
Est: Indicates whether the connection was locally ("Lcl") or remotely ("Rmt") established.
More Info: Indicates the NAT address in use for this connection.
Status lights
This section shows the current real-time status of the Netopia 4541/4542's status lights (LEDs). It is useful for
remotely monitoring the router's status. The Quick View screen's arrangement of LEDs corresponds to the
physical arrangement of LEDs on the router.
-PWR----ERROR----ETHERNET----DSL- - - - - - - - - - - - +--------LEDS---------
G
-
Each LED representation can report one of four states:
–: The LED is off.
R: The LED is red.
G: The LED is green.
Y: The LED is yellow.
The section
"Netopia 4541/4542 ADSL Router status lights" on page 2-3
for each LED.
Current DSL Status
1536
10
IP 92.163.4.1
LED Status
-
-
Monitoring Tools 12-3
Lcl
NAT 192.163.100.6
| '-'= Off 'G'= Green
| 'R'= Red 'Y'= Yellow
describes the meanings of the colors
Advertisement
Table of Contents
