Table of Contents
Advertisement
Address Translation Enabled:
IP Addressing...
Local WAN IP Address:
Local WAN IP Mask:
Remote IP Address:
Remote IP Mask:
Filter Set...
Remove Filter Set
Receive RIP:
Transmit RIP:
Configure IP requirements for a remote network connection here.
4.
Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information on NAT, see
For more information on IP addressing, see
The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed
for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.
5.
If you will be connecting with an IPX remote network, toggle IPX Enabled to Yes, and press Return.
Otherwise, accept the default No.
If you enable IPX routing, an IPX Profile Parameters menu item becomes available. Select IPX Profile
Parameters and press Return. The IPX Profile Parameters screen appears.
Remote IPX Network:
Path Delay:
NetBios Packet Forwarding:
Incoming Packet Filter Set...
Outgoing Packet Filter Set...
Incoming SAP Filter Set...
Outgoing SAP Filter Set...
Periodic RIP Timer:
Periodic SAP Timer:
Configure IPX requirements for a remote network connection here.
6.
Toggle or enter any IPX parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information, see
IP Profile Parameters
Yes
Unnumbered
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Both
v2 (multicast)
"Using Network Address Translation," beginning on page
Appendix B, "Understanding IP Addressing."
IPX Profile Parameters
"IPX Setup" on page
11-1.
IP Setup and Network Address Translation 10-9
00000000
10
Off
<<NONE>>
<<NONE>>
<<NONE>>
<<NONE>>
60
60
10-3.
Advertisement
Table of Contents
