Media Type For Print Output - Kyocera Ecosys FS-C2126MFP+ Operation Manual

Media Type for Print Output

Specify the paper type to be used for print output of the received fax.
Part that is operated
Reception:
1
FAX Media Type
*********************
2
Rings(Normal)
3 Rings(TAD)
FAX Media Type:
1 *All Media Type
*********************
2
Plain
3 Rough
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1
2
a b
[ Exit ]
3
4
a b
5
1
2
3
4
6-14
Refer to Basic Operation Procedure on page 6-7.
Press the or key to select [FAX Media Type].
Press the OK key.
Press the or key to select the desired paper
type. If you do not specify any paper type, select
[All Media Type].
Press the OK key.
Refer to Basic Operation Procedure on page 6-7.
Press the or key to select [Orig./Paper Set.].
Press the OK key.
Press the or key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
Setup and Registration