If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! Technical Specifications Model MG-IT-0012-C MG-IT-0022-C Horsepower 745.7 W / 1 HP 1118.5 W / 1.5 HP Throat Opening 2”...
Page 6
Installation and Operation PREPARATION PRELIMINARY OPERATIONS STABILITY The machines stability is designed so that it can be used without the risk of falling or unwanted movement. ELECTRICAL SUPPLY The electrical supply connection must be in conformance with the country legislation in which it is being used. 1.
For any procedures described in this section, it is necessary to remove some of the fixed protections from their positions. The removal can only be performed by an authorized Omcan technician. At the end of the maintenance procedures, these protections must be replaced and fastened in their original positions.
Page 8
Maintenance CLEANING All cleaning procedures must be started only when the machine is no longer in operation and is unplugged from the electrical socket. The machine, the electrical equipment and electrical components must never be submerged, sprayed, or washed with water. Use a dry cloth to wipe these components. Follow the steps as listed: FREQUENCY PERSONNEL...
The cause could not be identified. Contact Omcan directly. The machine doesn’t function: the The electrical supply is not Check and restore the electrical worm will not rotate.
Page 11
Parts Breakdown Model MG-IT-0012-C 11051 Item Item Item OMC ID Description Position OMC ID Description Position OMC ID Description Position 15351 FTS1201 Screw 4x8 (2 pcs.) 15393 FTS1219 Gear Big Easy 15402 FTS1239 Screw 15352 FTS1202 Disc Locking ABS DA 80mm.
Page 12
Parts Breakdown Model MG-IT-0022-C 11053...
Page 13
Parts Breakdown Model MG-IT-0022-C 11053 Item Item Item OMC ID Description Position OMC ID Description Position OMC ID Description Position 15351 FTS2201 Screw 4x8 (2 pcs.) 15458 FTS2220 Ring 164.5x2 15455 FTS2238 Aluminum Wheel 15352 FTS2202 Disc Locking Abs DA 80mm. 15441 FTS2221 Hub Cap with Housing...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 20
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the MG-IT-0012-C and is the answer not in the manual?
Questions and answers