Table of Contents
Advertisement
2. PEDESTAL INSTALLATION
a. Check that Hex Head Bolts in Fig 2-1 are backed out enough to clear
Pedestals when installed.
b. Install Pedestal – R (D) into pedestal support on Frame (B) while pulling
the cable out of pedestal support as shown in Fig. 2-1.
NOTE: Be careful not to pinch cables.
c. Install Pedestal – L (C) into pedestal support on Frame.
d. Using 5mm Hex Key, install but do not tighten eight Bolts-M8 x 75mm
(b) and Washers-M8 as shown in Fig. 2-1.
Fig. 2
Assembly Instructions
5
Advertisement
Table of Contents
