Table of Contents
Advertisement
TOOL REQUIREMENTS
o Hex Key – 5mm, T-Spanner-8 mm, Wrench 17mm (included with
hardware kit)
o 7/16 Open End Wrench (not included)
o Long Nose Pliers (not included)
o #2 Phillips Screwdriver (not included)
FRAME ASSEMBLY PROCEDURE
CAUTION: Use caution when assembling treadmill. Unpacking and assembling of
this treadmill is a two person task.
NOTE: Remove treadmill components from packaging.
1. REMOVE MOTOR COVER
a. Remove two screws and two Motor Decoration Covers from Frame.
Assembly Instructions
b. Remove seven screws and Motor Cover from Frame
Fig. 1
4
Advertisement
Table of Contents
