STOPPING
SPEED CONTROL LEVER
1
Set the speed control lever at the
low speed position and allow the
engine to run at low speed for 2 or
3 minutes before stopping.
ELECTRIC STARTER
2
Turn the key switch to the "STOP"
position.
OFF
RUN
START
FUEL VALVE
3
Close the fuel valve.
STOPPING ENGINE
WITH THE FUEL VALVE
Close the fuel valve while the
engine is running and wait until the
engine stops.
Set the key switch to the "STOP"
position after stopping the engine.
This procedure eliminates the fuel
from the carburetor.
Avoid allowing the fuel to remain in
the carburetor over long periods, or
the passages of the carburetor may
become clogged and malfunctions
may result.
− 11−