How-To" Maintenance; Engine Oil Change - Subaru EH72D Instructions For Use Manual

9. "HOW-TO" MAINTENANCE

0.7 to 0.8 mm
(0.03 in)
Oil drain plug
(On both sides)
Oil filler cap
INSPECTING THE SPARK
PLUG
Clean off carbon deposits on the
■
spark plug electrode using a plug
cleaner or wire brush.
Check electrode gap.
■
Adjust gap to :
0.7mm to 0.8mm (0.03 inches)
Use a proper spark plug :
■
BPR5ES (NGK)

ENGINE OIL CHANGE

Initial oil change
■
・ ・ ・ ・ ・ After 20 hours of operation
Thereafter
■
・ ・ ・ ・ ・ Every 50 hours of operation
1. When changing oil, stop the engine
and loosen the drain plug.
2. Re-install the drain plug before refill-
ing oil.
3. Refer to the recommended oil table.
(See Section 3 Pre-operation Checks)
4. Always use the best grade and clean
oil. Contaminated oil, poor quality oil
and shortage of oil cause damage to
engine or shorten the engine life.
OIL CAPACITY : 1.55 liter
− 17−