Fujitsu fi-4860C Operator's Manual page 32

■ Clearing the consumables replacement message
This scanner has the Abrasion counters to estimate life of the consumables. When a
counters, a counter for the Pad ASSY, the Pick roller unit, the Brake roller unit, the Front-
side lamp or the Back-side lamp reaches the pre-set value, the LCD shows a message that
the consumable have expired. Here is an example of the error messages.
Enter setup mode. (For the details on how to enter the setup mode, refer to "Chapter 7
OPERATOR PANEL MENUS"
Keep pressing
At this screen, you can select the consumable counter to reset. For the details on how to
clear consumable counter, please refer to the section "7.3 Setup Mode Details," "9. Abrasion
counter reset."
A b
(Next button) until the LCD shows the following message.
! 0 9
P i c
1.3 Basic Operations of the Operator Panel
a s
r i o n
A b r a s i
k / B r a k e
r m
a l a
o n C N T
/ P a d
1
9