Fujitsu fi-4860C Operator's Manual page 115

5. Attach a new Pad ASSY by engaging the hooks then pressing scroll into the slot of
the Guide plate.
ATTENTION
6. Install the Guide plate in the reverse order of the removal. By pressing the Guide
plate down and pushing the Guide plate back then you can install it smoothly.
7. Lower the ADF upper sheet guide gently.
8. Lift the Upper transport unit fully to release the safety lock and then lower the
transport unit carefully.
9. Clear the Pad counter.
Please refer to the section "7.3 Setup Mode Details", "9. Abrasion counter reset."
92
4.3 Replacing the Pad ASSY
Confirm that the pad is firmly attached to the
guide. Make sure that the two tabs are engaged
with the Guide plate.
If not attached firmly, paper feed errors such as
document jams may happen.
Hooks