Fujitsu fi-4860C Operator's Manual page 153

Are the Pick roller unit and the
Brake roller unit installed properly?
Have you scanned many sheets?
Check the consumable life.
(* 7)
Contact an authorized FUJITSU
Scanner service provider.
(* 1) For the details on required conditions, refer to the section "6.2 Document Quality."
(* 2) For the double-feed detection conditions, refer to "Appendix 2 Double-feed Detection
Conditions."
(* 3), (* 5) For the details on how to clean scanner, refer to "Chapter 3 DAILY CARE."
(* 4) For the details on how to replace Pas ASSY, refer to "Chapter4 REPLACING
CONSUMABLES."
(* 6) For the details on how to replace and install Pick roller unit and Brake roller unit, refer to
"Chapter 4 REPLACING CONSUMABLES."
(* 7) Check the wear of rollers. For the method to check the number of sheets scanned for each
consumable, refer to "7.3 Setup Mode Details," "9. Abrasion counter reset."
130
5.2 Troubleshooting
Continued from the previous page
NO
Brake roller properly. (* 6)
YES
YES
Replace the Pick roller unit and
the Brake roller unit if
necessary. (*6)
NO
nstall the Pick roller and the