Select Step Frequency - Uniden UBC355CLT Owner's Manual

SELECT STEP FREQUENCY

You can change the steps of each band. Selected step aff ects both
band search and Close Call. For air band, selected step aff ects
more air service bank. If the scanner displays for 3 seconds while
selecting step frequency mode, the scanner returns to Band Search.
1. Press SEARCH or BAND/STEP key to start Band Search.
2. Press and hold BAND/STEP key until the scanner displays the
current steps and the confi rmation tone is generated.
3. Use UP or DOWN key to select steps from Auto, 5kHz,
6.25kHz, 10kHz and 12.5kHz.
4. Press BAND/STEP key to change the steps for air band, the
scanner displays the current step for air band.
UB367ZV_UBC355CLT_1208.indd 57 UB367ZV_UBC355CLT_1208.indd 57
57
2011/12/08 19:55:58 2011/12/08 19:55:58