Outdoor Unit - Electra PXD 25 DCI Service Manual

INTRODUCTION
1.4 Filtration
Easily accessible, and re-usable pre-filters (mesh)
●
1.5 Control
The microprocessor indoor controller, and an infrared remote control, supplied as
standard, providing complete operating function and programming. For further details
please refer to the Operation Manual, Appendix A.
1.6

Outdoor Unit

The PXD outdoor units can be installed as floor or wall mounted units by using a
wall supporting bracket. The metal sheets are protected by anti- corrosion paint work
allowing long life resistance. All outdoor units are pre-charged. For further information
please refer to the Product Data Sheet, Chapter 2.
It includes :
Compressor mounted in a soundproofed compartment :
●
Rotary – for PXD25 DCI and PXD35 DCI.
Scroll – for PXD50 DCI.
It includes:
Axial fan.
●
Outdoor coil with hydrophilic louver fins for RC units.
●
Outlet air fan grill.
●
Service valves" flare" type connection.
●
Interconnecting wiring terminal block.
●
Advanced DC inverter controller.
●
1.7 Tubing Connections
Flare type interconnecting tubing to be produced on site.
For further details please refer to the Installation Manual, Appendix A
1.8 Inbox Documentation
Each unit is supplied with its own installation and operation manuals.
1-2 Revision Y05-01
CONTENT
Service Manual - PXD DCI