Kinroad XT50QT-5 User Manual page 30

!CAUTION
Make the pin in the concave part of the adjuster
otherwise, the clearance between the rear brake 1ever
and grip will change when driving and it is very
dangerous．
!CAUTION`
Replace the brake shoe if the marked continuous
line is out of the limits when you take the brake
lever tightly.
CORROSION OF THE BRAKE SHOE
To know the corrosion
shoe ． please inspect the places as the picture
status of the brake
- 30 -
shows ． Press the brake lever to the end ． if the
indicator shows that it is out the using limits，please
go to the dealer's service station to replace it．
REPLACE THE FUSE
Turn the ignition switch to OFF to check if the
fuse is complete，replace the fuse if it is blown．
The fuse is on the terminal of the battery ， the
standard current flow is 15 A.
INSTALL AND ASSEMBLE THE FUSE
Take the terminal from the battery, and take off the
fuse from the terminal.
MAIN POINTS
Don't touch the central part of the terminal
after you take it down from the battery．
!CAUTION
1.Always be sure to replace the blown fuse with
the correct amperage fuse．
2.Using super amperage fuse will lead to heat or
damage of the lines．