Using Methods Of Trunk; Light Switch - Kinroad XT50QT-5 User Manual

Light switch

The front light switch has three positions,
And "●"(a white point).
When the switch is in this position, the
front head light ,tail and meter lights are
all lit up.
When the switch is in this position,the tail,
betraying and meter Lights are lit up.
" ● "When it is in
illuminator, tail, betraying and meter lights are all
MAIN POINTS
After the engine is started
ignition switch, you can inspect the wiring diagram
for the lights.
USING METHODS OF THE TRUNK
this position. The front
by pressing the
off.
OPEN THE TRUNK
Open the seat when you want use the trunk or put
the helmet in it.
1.put the ignition key in the lock of the seat and
turn to the right.
2.Hold the seat from the back up and open the seat.
3.Press the seat and the lock will be closed auto-
matically.
NOTE
1.Hold the seat up slightly to see if the lock is
closed.
2.If you press the seat when the ignition key in
the trunk, you can not take the key out, so please pay
much attention to this.
3.Do not keep such items as cotton on any place
under the seat except the trunk.
- 11 -