Correct Driving Operations - Kinroad XT50QT-5 User Manual

adding oil.
2.The engine will be easily damaged when driving
without oil.
3.Don't mix oil with other type of oil and it
will affect the performance of the engine.
4.Wipe off the oil outside the engine.
5.Close the cover of the oil tank.
6.Don't put cotton on the oil tank to avoid
keeping the oil back or damaging the engine.
! CAUTION
Please pay much attention to the following items
when Adding gasoline or oil to the engine.
1.Shut off the engine and turn the ignition switch
to OFF.
2.Fire is forbidden and do not add oil beside fire
and smoke.
3.Add gasoline of oil on a plat place.
4.Don't add gasoline too much to avoid it coming
out.
5.Don't make dirt into the gasoline tank.
6.Close the cover of the oil tank.
7.Wipe off the gasoline outside the gasoline tank.
Forbid to store gasoline at home since it is very
dangerous.

CORRECT DRIVING OPERATIONS

STARTING METHOD OF THE ENGINE
BEFORE STARTING
1.You must check the volume of oil and gasoline.
2.Place the motorcycle on the center stand．
3.Start the engine at left side of the motorcycle．
Turn the ignition switch to ON position
[1]
Please inspect the motorcycle according to the
following items：
1.If the ignition switch has been on ON position．
2.Inspect if the front lamp and the rear lamp lit or
not．
3.If a11 the switches are functional or not．
4.If the horn is functional when pressing the horn
button．
5.If the horn is un—functional ．perhaps the fuse is
broken，Please refer to page 33
After you have done the above inspections，please go
to dealer's service station if the lights or the horn
are still un-functional．
- 13 -