Kinroad XT50QT-5 User Manual page 22

BREAK IN
Proper break-in is important to achieve maximum
life and performance from your motorcycle．
1.The first month or the first 1000 km drive
with in 45km／h．
2.Avoid unnecessary accelerating suddenly．
!CAUTION
Don't a11ow to drive with single hand or both hands
free， don't allow to 1oad goods or children on the
footrest ． Obey the safe speed and remember safe
driving．
Check the following items before going to service
station．
The engine can not be started?
Check the following items again：
1.If there is fuel in the engine?
2.Turn the ignition switch to ON position．
3.Press the starting button while squeezing
the brake 1evers．
Control the bars while turning the throttle．
Re-start the engine after you have confirmed the
above items．
THE START ENGINE UN-ROTATE
Press the button ， if the start engine does not
rotate．check：
1．If the ignition switch is in the ON position?
Press the start button mean while squeezing the
2．
front or the rear brake ,if it is still not started.
Turn the ignition switch to ON position and press
3．
the horn button, if the horn has no noise to see if
the capacity of the battery is not enough
- 22 -