Kinroad XT50QT-5 User Manual page 10

Table of Contents

Advertisement

MAIN POINTS
1.If it is hard to lock,you can turn the handlebar
to the right a little and then lock it.
2.Shake the handlebars left and right to be sure
that it has been locked.
THE TURN SIGNALS
Use the turn signals when you want to turn to the
1eft or the right.
R:the right turn signal will flash.
L:the left turn signal will flash.
MIDDLE:the turn signal will not flash.
After you have finished, please turn off the turn
signals.
THE HORN BUTTON
Press the horn button,the horn will loud.
MAIN POINTS
Do not use the horn if un- necessary.
THE CHANGEABLE SWITCH FOR
THE FRONT LIGHT
Use this switch,you can change the light direction
of the front lamp.
HI:the high beam
LO:the low beam
MAIN POINTS
When there are cars before you or coming towards
you in the night, please use the LO switch.
THE START SWITCH
This Switch is to start the engine
Turn the switch
brake lever . meanwhile press the starting button and
the engine will be started.
NOTE
If the engine call not be started in 3 seconds,
please use the kick starter to stare the engine to
avoid emptying the battery. Then check the starting
system.
THE FRONT LAMP SWITCH
- 10 -
to ON position and squeeze the

Advertisement

Table of Contents
loading

Table of Contents