Meanings Of Signal Words - Bostitch MRC6 Original Instructions Manual

READ THE INSTRUCTION HANDBOOK:
Before positioning, operating or adjusting the compressor, read the instruction book carefully.
RISK OF ELECTRIC SHOCK:
Caution: before doing any work on the compressor, it must be disconnected from the power supply.
RISK OF HIGH TEMPARATURES:
Caution: the compressor contains some parts which might reach high temparatures.
RISK OF ACCIDENTAL START-UP:
Attention: the compressor could start automatically in case of a black-out and subsequent reset.
IMPORTANT INFORMATION
Read and understand all of the operating instructions, safety precautions and warnings in the Instruction Manual
before operating or maintaining this compressor. Most accidents that result from compressor operation and
maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided
by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures.
Basic safety precautions are outlined in the "SAFETY" section of this Instruction Manual and in the sections which
contain the operation and maintenance instructions. Hazards that must be avoided to prevent bodily injury or machine
damage are identified by WARNINGS on the compressor and in this Instruction Manual. Never use this compressor in
a manner that has not been specifically recommended by manufacturer, unless you first confirm that the planned use
will be safe for you and others.

MEANINGS OF SIGNAL WORDS

WARNING: indicates a potentially hazardous situations which, if ignored, could result in serious personal injury.
CAUTION: indicates a hazardous situations which, if ignored, could result moderate personal injury, or could cause
machine damage.
NOTE: emphasizes essential information
SAFETY
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE COMPRESSOR.
WARNING: DEATH OR SERIOUS BODILY INJURY COULD RESULT FROM IMPROPER OR UNSAFE USE OF
COMPRESSOR. TO AVOID THESE RISKS, FOLLOW THESE BASIC SAFETY INSTRUCTIONS.
READ ALL INSTRUCTIONS
1. NEVER TOUCH MOVING PARTS Never place your hands, fingers or other body parts near the compressor's moving
parts.
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE Never operate this compressor without all guards or safety
features in place and in proper working order. If maintenance or servicing requires the removal of a guard or safety
features, be sure to replace the guards or safety feature before resuming operation of the compressor.
3. ALWAYS WEAR EYE PROTECTION Always wear safety goggles or equivalent eye protection. Compress ed air must
never be aimed at anyone or any part of the body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK Prevent body contact with grounded surfaces such as pipes,
radiators, ranges and refrigeration enclosures. Never operate the compressor in damp or wet locations.
5. DISCONNECT THE COMPRESSOR Always disconnect the compressor from the power source and remove the
compressed air from the air tank before servicing, inspecting, maintaining, cleaning, replacing or checking any parts.
6. AVOID UNINTENTIONAL STARTING Do not carry the compressor while it is connected to its power source or
when the air tank is filled with compressed air. Be sure the knob of the pressure switch in the "OFF" position before
connecting the compressor to its power source.
7. STORE COMPRESSOR PROPERLY When not in use, the compressor should be stored in dry place. Keep out of
reach of children. Lock-out the storage area.
8. KEEP WORK AREA CLEAN Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture
etc...
GB