Check Or Delete Your Outgoing Message; Select Outgoing Message Mode; Record A Memo; Call Screening - Sandstrom S200DT10 Instruction Manual

Check or delete your outgoing message

Deleting a personal outgoing message automatically reinstates the prerecorded outgoing message.
You cannot delete a pre-recorded message.
1. Press the Menu button, scroll the
2. Scroll the button to Outgoing Message and press the Select button.
button to Play and press the Select button.
3. Scroll the
4. Scroll the or
button to Personal OGM and press the Select button.
5. Press the
6. The message is played. Press the OK button to stop playback or press the Delete button to delete a
personal OGM.
7. Press the Back button to return to the previous menu level.

Select outgoing message mode

Choose which outgoing message you want to be played to callers.
1. Press the Menu button, scroll the
2. Scroll the button to Answer Settings and press the Select button.
3. Answer Mode is highlighted, press the Select button.
4. Scroll the or
5. If there is a personal OGM saved, press the
press the Select button. Your selection is confirmed. If there is no personal OGM saved the default
OGM will be selected.
6. Press the Back button to return to the previous menu level.

Record a memo

Memos can only be recorded via the handset.
1. Press the Menu button, scroll the
2. Scroll the button to Record Memo and press the Select button.
3. The display shows Please speak after the tone.
4. After your hear the tone, speak your memo then press the Save button or the
recording.
5. Your memo is played back. If you want to delete it, press the Delete during playback. If you press the
Save button or wait for the message to play back, it will be saved.
6. Press the Back button to return to the previous menu level.

Call screening

When the answer machine is on and takes a call, you can use the loudspeaker to listen to the caller leav-
ing a message. You can then identify the caller and decide whether to take the call in person.
1. When your unit rings, wait for the answer machine to take the call. When the caller begins leaving a
message, the display shows Recording. Press the Screen button to hear the caller.
2. To interrupt and speak to the caller directly, press the
display shows You have a new message, press the Play button to play new messages.
3. Press the Back button to return to the previous menu level.
While screening, you can adjust the volume by pressing the or button�
GB-38
S100DT10_100722.indd 38
button to Answer Machine and press the Select button.
button to Answer & Record or Answer Only and press the Select button.
button to Answer Machine and press the Select button.
button to Answer & Record or Answer Only and press the Select button.
button to Answer Machine and press the Select button.
button to Default OGM or Personal OGM and
or
button after the caller has hung up, and the
button to end
7/22/10 10:36 AM