CALL WAITING
You must subscribe to your network's Caller Display service for Call Waiting to work.
1. During a call, you hear a soft beep in the earpiece and the display shows the number of the caller or
the name if it matches an entry in your phonebook. If these are not available, the display shows Call
Waiting.
2. Press the
button to put your current caller on hold and speak to the new caller.
3. Press the
button again to switch between both callers (In some countries, it is required to dial R +
2).
4. Press the
button to finish the current call or the
VOICEMAIL
If you have subscribed to your network operator's voicemail messaging service, your handset can inform
you when you receive new voicemail.
If you have new voicemail, You have new voicemail is displayed.
Press the Listen button to dial the voicemail number preset on the handset. If your voicemail
•
number is different to the number stored in the handset, you can manually dial your preferred
voicemail number.
Or press the Back button to listen to your voicemail at a later time. A reminder
•
displayed.
GB-34
S100DT10_100722.indd 34
button to end both calls.
icon will be
7/22/10 10:35 AM