Base Settings; Base Ringtone; Base Ringer Volume; Dialling Mode - Sandstrom S200DT10 Instruction Manual

BASE SETTINGS

Base ringtone

Select from 5 base ringtones.
You will hear a sample ring for each one you highlight.
1. Press the the Menu button, scroll the
button to Set Base and press the Select button.
2. Scroll the
3. Ringtone is highlighted. Press the Select button.
4. Scroll the or
5. Press the Select button to confirm.
6. Press the Back button to return to the previous menu level or the

Base ringer volume

The base has 5 ringer volume settings plus Off.
1. Press the Menu button, scroll the
button to Set Base and press the Select button.
2. Scroll the
button to Ringer Volume and press the Select button.
3. Scroll the
4. Press the or
5. Press the Back button to return to the previous menu level or the

Dialling mode

Your unit is pre-set to Tone dialling. You should not normally need to change this setting. The dial mode
options are Tone or Pulse.
1. Press the Menu button, scroll the
button to Set Base and press the Select button.
2. Scroll the
3. Scroll the button to Dialling Mode and press the Select button.
4. Press the or
5. Press the Back button to return to the previous menu level or the

Ring priority

When you have more than one handset registered to your base, you can set one handset to ring before
the other handsets. This allows one handset user to answer all incoming calls first, like a receptionist.
Choose All Handsets if you want all handsets to ring at the same time or Select Handset to nominate a
handset to ring two times before the others.
1. Press the Menu button, scroll the
button to Set Base and press the Select button.
2. Scroll the
3. Scroll the button to Ring Priority and press the Select button.
4. Press the or
• I f you choose Select Handset all available handsets are displayed� Scroll the or button to highlight
the handset you want then press the Select button�
• Scroll the or button to the number of rings you want to set 2, 4 or 6 and press the Select button�
5. Press the Back button to return to the previous menu level or
GB-26
S100DT10_100722.indd 26
button to Settings and press the Select button.
button to highlight the ringtone you want.
button to Settings and press the Select button.
button to display the volume level you want. Press the Select button to confirm.
button to Settings and Press the Select button.
button to highlight Pulse or Tone then press the Select button to confirm.
button to Settings and press the Select button.
button to highlight All Handsets or Select Handset then press the Select button.
button to return to standby.
button to return to standby.
button to return to standby.
button to return to standby.
7/22/10 10:35 AM