Clock & Alarm; Date & Time; Set Alarm; Alarm On/Off - Sandstrom S200DT10 Instruction Manual

CLOCK & ALARM
Date & time
If you subscribe to your network's caller display service, the base sets the date and time for all handsets
whenever a call is received. You can manually set the time on an individual handset.
1. Press the Menu button, scroll the
2. Date & Time is highlighted, press the Select button.
3. Enter the date using the format DD/MM/YY.
4. Enter the time and press the Save button.
5. Press the Back button to return to the previous menu level or the

Set alarm

When the alarm is set, the display shows the
Each handset can have a different alarm setting.
1. Press the Menu button, scroll the
2. Scroll the button to Alarm and press the Select button.
button to select On and press the Select button.
3. Press the or
4. Press the or button to select Once, Mon-Fri or On Daily and press the Select button.
5. Enter the time you want the alarm and press the Save button.
6. Press the Back button to return to the previous menu level or the
If the alarm was set to Once, the
If set to On Daily or Mon-Fri, the
Alarm on /off
Once an alarm has been set, you can switch the setting On or Off.
1. Press the Menu button, scroll the
button to Alarm and press the Select button.
2. Scroll the
button to select On or Off and press the Select button.
3. Press the or
4. Press the Back button to return to the previous menu level.

Switch off alarm ring

When the alarm goes off, press the Stop button.
If you are using the handset to make a call when the alarm ring is due, the
beep in the earpiece�

Time format

Set the time format to 12 or 24 hour setting.
1. Press the Menu button, scroll the
button to Time Format and press the Select button.
2. Scroll the
3. Press the or button to select 12 Hour or 24 Hour and press the Select button.
4. Press the Back button to return to the previous menu level.
S100DT10_100722.indd 29
button to Clock & Alarm and press the Select button.
icon.
button to Clock & Alarm and press the Select button.
icon will disappear from the screen after switching off the alarm�
icon will remain on the screen�
button to Clock & Alarm and press the Select button.
button to Clock & Alarm and press the Select button.
button to return to standby.
button to return to standby.
flashes and you hear a
GB-29
7/22/10 10:35 AM