Answer Machine; Base Control Buttons; Switch The Answer Machine On / Off; Answer Delay - Sandstrom S200DT10 Instruction Manual

ANSWER MACHINE
Your unit can digitally record up to 60 minutes of messages or up to 59 messages. Each message can last up
to a maximum of 3 minutes. As well as recording incoming messages, you can record memos for other users.
You can operate your answer machine from:
• the base.
• the handset.
You will need to set the date and time (if you have not already done so) so that you will know when each message was
received,.

Base control buttons

Press to turn the answer machine on/off.
Press and hold to enter the outgoing message (OGM) selection mode.
Press to play all stored messages.
Press to pause or resume playback.
Press to stop message playback.
Skip to the next message during message playback.
Select Answer Only OGM during OGM selection mode.
Replay current message.
Press twice to skip back to previous message.
Select Answer & Record OGM during OGM selection mode.
Delete current message during message playback.
Press to delete personal OGM during OGM playback. The pre-recorded OGM is selected and
played.
Increase speaker volume during message playback.
Decrease speaker volume.

Switch the answer machine on / off

1. Press the Menu button on the handset, scroll the
button.
button to Answer On/Off and press the Select button.
2. Scroll the
3. Scroll the or
handset display shows in idle.
This can also be done via the answer machine by pressing the

Answer delay

Answer delay sets the number of times your unit will ring before the answer machine picks up your call
and starts playing the outgoing message.
You can change this setting to between 2 - 9 rings or Time Saver.
The default setting is 5 rings.
1. Press the Menu button on the handset, scroll the
button.
button to Answer Settings and press the Select button.
2. Scroll the
3. Scroll the or
4. Scroll the or
5. Press the Back button to return to the previous menu level.
GB-36
S100DT10_100722.indd 36
button to highlight On or Off and press the Select button. When switched on, the
button to Answer Delay and press the Select button.
button to the setting you want and press the Select button.
button to Answer Machine and press the Select
button on the base�
button to Answer Machine and press the Select
7/22/10 10:35 AM