Date And Time; Set Date And Time Manually; Handset Range; Signal Strength - Sandstrom S200DT10 Instruction Manual

DATE AND TIME

Providing you have subscribed to your network's Caller Display service, the date and time is set automati-
cally for all handsets when you receive your first call.
The date and time is recorded with each answer machine message you receive.
If you do not have a Caller Display service you can set the date and time manually.

Set date and time manually:

1� P ress the Menu button and scroll the or button to Clock & Alarm then press the Select button�
2� D ate & Time is highlighted� Press the Select button�
3� E nter the date using the format DD/MM/YY e�g� 01 09 08 for 1st September 2008� Enter the time in 12 or
24 hour time format� Press the Save button� To change the Time Format�
4� P ress the or Back button until you return to standby

HANDSET RANGE

The unit has a range of 300 metres outdoors when there is a clear line of sight between the base and
handset� Any obstruction between the base and handset will reduce the range significantly� With the
base indoors and handset either indoors or outdoors, the range will normally be up to 50 metres� Thick
stone walls can severely affect the range�

SIGNAL STRENGTH

• T he icon on your handset indicates when you are in range� When out from range from the base, the
screen shows Searching��� and the flashes�
• D uring a call, if the handset goes out of range the handset will emit an out of range warning tone�
• I f you are on a call, the line will hang up if the handset moves out of range from the base� Move back
within in range� The handset will automatically reconnect to the base�
IMPORTANT
The answer machine must be plugged into the mains power at all times. Do not connect the telephone line cord into the wall
socket until the handset is fully charged. Only use the power and telephone cables supplied with this product.
GB-10
S100DT10_100722.indd 10 7/22/10 10:35 AM