Default Settings; Eco Mode - Sandstrom S200DT10 Instruction Manual

Default settings

Handset Name
Handset Internal Ringtone
Handset External Ringtone
Handset Ring Volume
Receiver Volume
Key Beep
Auto Talk
Screensaver
Base Ringtone
Base Ring Volume
Dialling Mode
First Ring
System PIN

ECO Mode

Baby Monitor
Answer Machine
Outgoing Message
Ring Delay
ECO mode
To reduce the level of power emissions, you can select low power or ECO mode. When the ECO mode is
set to On, the base transmission power will be reduced.
To turn ECO Mode to On or Off:
1. Press the Menu button, scroll the
2. Scroll the button to Set Base and press the Select button.
button to ECO Mode and press the Select button.
3. Scroll the
4. Press the or
NOTE
When ECO mode is set to ON, the handset range will be reduced.
The display will show Set to ON or Set to OFF depending on the
selection together with a confirmation tone.
When set to ON, icon is
displayed in place of the
standard signal icon.
GB-28
S100DT10_100722.indd 28
Handset
Melody 2
Melody 1
5
4
On
On
Clock
Melody 1
5
Tone
On
0000
Off
Off
On
Answer & Record
5 rings
button to Settings and press the Select button.
button to highlight On or Off then press the Select button to confirm.
7/22/10 10:35 AM