Table of Contents
Advertisement
Access the System Documentation
If you are installing this system and another person is the system administrator, deliver this book to the
system administrator when the installation is complete. Ensure that the system administrator reads the
following information and is aware of the options to access the documentation for the new system.
Accessing Hardware Documentation
Documentation for the IBM Eserver pSeries is available online. Visit the IBM Eserver pSeries
Information Center at http://publib16.boulder.ibm.com/pseries/en_US/infocenter/base.
v To access the pSeries publications, click Hardware documentation.
v To view information about the accessibility features of Eserver pSeries hardware and the AIX operating
system, click AIX and pSeries accessibility.
Accessing System Documentation
Documentation for the AIX operating system is available from the IBM Eserver pSeries Information
Center at http://publib16.boulder.ibm.com/pseries/en_US/infocenter/base. Select AIX documentation. The
AIX Documentation CD contains the base set of publications for the operating system, including
system-management and end-user documentation.
Verify Partition Standby and Full System Partition Power Options
If an HMC is attached, perform these procedures to verify that the system can be booted to
partition-standby and full-system partition modes. Perform this procedure just before you turn the system
over to the customer.
1. At the HMC, in the Navigation area, click the Partition Management icon.
2. In the Contents area, select the managed system.
3. In the menu, click Selected.
4. Select Power On.
You are asked to select a power-on mode from the following:
v Partition Standby
v Full System Partition
v System Profile
5. In the Power On Options menu, select Partition Standby and click OK.
6. If the boot to Partition Standby is successful, LPAR will appear in the operator panel.
7. Reboot the system to Full System Partition.
8. If the boot to Partition Standby and the boot to Full System Partition operations are not successful,
follow normal service procedures to correct the problem.
Final Installation Tasks
This section contains information on completing the installation of the 7038 Model 6M2.
Complete System Records and Installation Procedure
Update the "System Records" in Appendix H, "System Records," on page 155 to reflect the configuration of
the system adapters and devices that are installed. After completing the records, deliver this book to the
system administrator. The system administrator can proceed with installing and configuring the operating
system.
Chapter 3. Verifying the Hardware Operation
37
Advertisement
Table of Contents
