Table of Contents
Advertisement
3. Remove the adapter or blank filler and ensure that the handle is in the up position. If you need to
move the handle, ensure that the gray locking bar is pulled into the unlocked position, and then rotate
the adapter handle until the handle is in the up position (the cassette linkage will extend down beyond
the cassette top).
If you are installing a short adapter or blank filler, proceed to "Short Adapter or Blank Filler Installation"
on page 84. If you are installing a long adapter, go to "Long Adapter Installation" on page 100.
1
2
1 Handle Release Sever
2 Lock
Chapter 5. Installing Options
83
Advertisement
Table of Contents
