Appendix A Specifications - HP t730 Hardware Reference Manual

A Specifications
For the latest specifications or additional specifications on the thin client, go to
quickspecs/
Dimensions
Width
Depth
Height (without stand)
Height (with stand)
Temperature Range (fanless design)*
Operating**
Nonoperating
(max. rate of change is 20°C per hour or 36°F per hour)
*Specifications are at sea level with altitude derating of
1°C/300 m (1.8°F/1000 ft) to a maximum of 3 Km (10,000 ft),
with no direct, sustained sunlight. Upper limit may be limited
by the type and number of options installed.
Relative Humidity (non-condensing)
Operating
(max. wet bulb temperature is 28°C or 84.2°F)
Nonoperating
(max. wet bulb temperature is 38.7°C or 101.6°F)
Maximum Altitude (unpressurized)
Operating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Nonoperating
(max. allowed rate of change is 457 m per minute or 1500 ft
per minute)
Power Supply
Operating Voltage Range
Rated Line Frequency
Power Output (maximum)
Rated Output Current (maximum)
Output Voltage
30

Appendix A Specifications

and search for your specific thin client to find the QuickSpecs.
65 mm 2.56 in.
220 mm 8.66 in
240 mm 9.45 In
250 mm 9.84 in.
10°C to 40°C 50°F to 104°F
-30°C to 60°C -22°F to 140°F
** The operating temperature range when the thin client is
attached to a flat panel using the HP Quick Release is 10°C
to 35°C (50°F to 95°F).
10% to 90%
5% to 95%
3048 m 10,000 ft
9144 m 30,000 ft
100 VAC to 240 VAC
50 Hz to 60 Hz
85 W
4.36 A
+19.5 V dc
http://www.hp.com/go/