Securing The Thin Client; Mounting And Orienting The Thin Client; Hp Quick Release - HP t730 Hardware Reference Manual

Securing the thin client

These thin clients are designed to accept a security cable lock. This cable lock prevents unauthorized removal
of the thin client, as well as locking the secure compartment. To order this option, go to the HP website at
http://www.hp.com
1. Locate the cable lock slot on the back panel.
2. Insert the cable lock into the slot, and then use the key to lock it.

Mounting and orienting the thin client

HP Quick Release

An optional Quick Release mounting bracket is available from HP for mounting the thin client to a wall, desk,
or swing arm. When the mounting bracket is used, do not install the thin client with the I/O ports oriented
towards the ground.
This thin client incorporates four mounting points on the right side of the unit. These mounting points follow
the VESA (Video Electronics Standards Association) standard, which provides industry-standard mounting
interfaces for Flat Displays (FDs), such as flat panel monitors, flat displays, and flat TVs. The HP Quick Release
connects to the VESA-standard mounting points, allowing you to mount the thin client in a variety of
orientations.
NOTE: When mounting to a thin client, use the 10 mm screws supplied with the HP Quick Release.
8 Chapter 2 Setup
and search for your specific thin client.