Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the power button board:
1.
Remove the PM1.9×2.4 broad head screw (1) that secures the power button board to the keyboard/
top cover.
2.
Lift the front edge of the power button board (2) and swing it up until it disengages from the tab (3) on
the keyboard/top cover.
3.
Remove the power button board (4) and cable.
Reverse this procedure to install the power button board.
32
Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
768010-001
28).