Kawai AnyTime X GP Service Manual page 8

［Instructions］ － Rotating the Sensor －
【A-6】 Loosen all six screws fully, as shown in Figure 4.
＊ Loosen each screws by around three rotations in turn, do not loosen the screws fully one by
one.
＊ The screws will not drop off easily even after fully loosened because they are provided with a
a drop prevention washer.
Screw
【A-7】 Lift the sensor unit end and rotate it slowly to this side, as shown in Figure 5.
＊ The sensor units are independent between the lower tone and medium/high tone areas. You
may need to rotate them separately.
Screw
Screw
Figure 4
Rotate to this side
Figure 5
Screw
–  –
Screw
Screw