Kawai AnyTime X GP Service Manual page 33

【A-4】Control Panel (3）
2
3
6
5
5
Additional processing
on rotary damper
countersinking hole
Provide a
Perform countersinking
countersinking
on the round hole using
hole on this position
a drill bit etc.
＊ Screw head should not protrude
4
Position of
Bumpon install position
SW. PWB assy
Assembling.Instruction
6
＊ Observe.the.countersinking.position.shown.in.the.drawing.below.middle.
1
7
No. Description
1. Control.Panel.Assy.
2. Panel.Cover.
3. Rotary.Damper.
4. Bumpon.
5. Screw.
+.BINDING.TAPTITE.SCREW.
6.
S.TITE.
– 33 –
1. Perform countersinking processing on Rotary damper ③ as shown in the
drawing left below.
2. Attach Bumpon ④ on the postion on SW. PWB assy ② which the drawing
below right indicates.
3. Place panel cover ② on control panel assy ① and fasten it with two screws ⑥ .
4. Fasten rotary damper ③ on panel cover ② with two screws ⑤ .
Finished control panel assy
Description
Control.panel.assy
Panel.cover
Rotary.damper NRT-G5-150.
Bumpon SJ-5003.
+.Flat.machine.screw M2.x.6.
+.Binding.taptite.screw.S.tite M3.x.6..Black
Remarks PN
See.A-4.(2)
909530.
816342.
810883.
798901.
812271.