Kawai AnyTime X GP Service Manual page 31

【A-4】Control Panel (1)
Assembling.Instruction
1. Attach the four pieces of double-sided adhesive tapes ② on the control panel Assy ① .
2. Attach Himelon ③ onto the center and inner part of Control Panel Assy ① .
＊ Observe.the.pasting.position.shown.in.the.drawing.below.
Double-Sided.Tape.and.Pasting.Position
・Attach the key top on a position as close as possible to the opening, and as not to protrude from the hole.
・The Himelon should stay within the control panel (without protruding ).(See Drawing A for detail）
3
2
1
No. Description
1. Control.Panel.Assy. Control.panel.assy
2. Double-sided.Adhesive.Tape. Double-sided.adhesive.tape
3. HIMELON. Himelon
2
5
1
A
Description Remarks
3.x.95.
HN611B.
Assembling.Instruction
1. Install key guides ② ③ ④ on the double-sided adhesive tapes of the control panel assy.
＊ Refer.to.the.disposition.shown.in.the.drawing.below.
2. Install the LCD cover ⑤ on the double-sided adhesive tape (of LCD cover).
＊ Refer.to.the.install.position.shown.in.the.drawing.below.
Key.Top.Disposition.and.LCD.Cover.Install.Position
＊ Key.tops.without.number.in.drawing.below.are.those.with.lens.(Black).
＊ nstall.the.lens.of.key.top.on.the.upper.part.in.the.drawing.
5
4
4
A
No. Description
1. Control.Panel.Assy.
Key.Top.(S).with.Lens.(S).
2.
Red.+.Half.Translucency.
PN
Key.Top.(S).with.Lens.(S).
3.
909718. DarkBrown.+.Half.Translucency.
814204. 4. Key.Top.(Black).DarkBrown.
816602. 5. LCD.Cover.
– 31 –
4
4
3
2
lens
1
Description
Control.panel.assy
Key.Top.(S).with.lens.(S).
Red.+.Half.Translucency.
Key.Top.(S).with.lens.(S).Dark.
Brown.+.Half.Translucency.
Key.Top.(Black).Dark.Brown
LCD.COVER
3
2
len
1
With lens Red x 1 piece
4
Without lens Black x 2 pieces
Remarks PN
909718.
816077.
816076.
816075.
816602.